PFAFF 8320 Piping Work Unit
Programmable hot-wedge welding machine
$62000 excl. GST
Price includes installation, additional shipping/travel costs may apply.
Prices are correct at the time of publishing, and may be subject to change.
With the PFAFF 8320 sealing sequences can be programmed, i.e. depending on the cutting and the fabric any parameters can be entered for any given segment and reproduced with 100% accuracy.
An absolute innovation from PFAFF!
12 month warranty
×
PFAFF 8320 Piping Work Unit
PFAFF 8320 Piping Work Unit
Programmable hot-wedge welding machine
Need some more information?
Our sales technitian will be in contact with you soon
Features
› Interchangeable swivel unit - easy exchange from hot air to hot wedge or vice versa
› Differential transport possible during sealing
› No buttons, no pressure gauges: One touch screen and 100% parameter control
› All parameters are controlled electronically:
One integrated control board monitors the heat-sealing temperature, the air flow, the roller pressure and the two motors for the top and bottom roller
› Proportional valves enable the dynamic adjustment of the air flow and roller pressure
› Two precision-controlled motors permit an extremely accurate differential transport
› 2-axis swing in mechanism:
The nozzle or wedge can be very accurately adjusted without tools by using a compound slide rest
› Hinged post: The bottom post holder can be turned over 180° as desired
Depending on the application it is possible to feed off the arm, as post- or feed on the arm
› Adjustable stand height: With a crank the working height can be adjusted exactly to suit the application
› Different wedge sizes + different nozzle sizes and shapes
› Several operating levels protected by passwords: If desired, the operator can only select certain operating sequences
› Selectable languages and units of measurement
› Heat-up and cool-down cycles possible
› Machine can be integrated in a complete production unit
› Special winding unit with rugs
Options:
Tubing guide for filter tubes
Exhaust unit
Tape reel unit for taping operations
Double roller-arm with table
Hot-wedge or hot-air nozzle on the right-hand side
Puller (direct puller or as separate unit)
Exhaust unit
Tape reel unit for taping operations
Double roller-arm with table
Hot-wedge or hot-air nozzle on the right-hand side
Puller (direct puller or as separate unit)
Specifications
| Sealing Temperature: | max 500 °C |
| Sealing Speed: | max. 10 m/min (standard), option up to 30 m/min available |
| Width of Hot Wedges (mm): | 7, 9, 12, 15, 20, 30, 40, 50 |
| Width of Nozzles: | 10 - 50 mm (others available) |
| Power Input: | 1500 W (approx) |
| Heating Capacity: | 1000 W (approx) |
| Connection Voltage: | Single Phase AC 230 V 50/60 Hz |
